Customer Support -- What's New

It’s not too late.

We have plenty of ULSD and kerosene pump decals available – plus overnight shipping is available to keep you EPA compliant by tomorrow’s deadline.

You can place your overnight order quickly and easily by calling our customer care team toll-free at 1-877-210-4287. Orders placed by 4:30 pm EST are available for overnight delivery. Decals can also be ordered through the OPIS website.

Oct. 1 marks the deadline for the labeling requirement for pumps dispensing:

If you haven’t updated your labels with the revised language, there is still time to order your labels and have them delivered in time to meet tomorrow’s deadline.

Place your order today – fines are steep ($37,500/day) for not complying!

These labeling requirements are due to mandatory changes to sulfur levels in diesel fuel. (Note: federal pump labeling requirements do not apply in California, where only ULSD is sold.) All petroleum marketers, fleets and other wholesale purchaser-consumers of on-road and off-road diesel will need to switch out their old labels depending on which fuels they handle.

Where Can I Purchase These New Labels?

To order your new decals, call 1-877-210-4287 or use this online order form.

Hi Habib,

Confusion is growing regarding the new EPA pump labeling requirements.

These labeling requirements are due to mandatory changes to sulfur levels in diesel fuel.

Here’s What We Know

According to the EPA, changes in the sulfur levels of diesel fuel created the need for four new labels. All petroleum marketers, fleets and other wholesale purchaser-consumers of on-road and off-road diesel will need to switch out their old labels depending on which fuels they handle.

What Labels Are Needed

The four labels that must be affixed to diesel pumps as noted in sections 80.572 (a-d) and 80.573 (a) of the Code of Federal Regulations are for labeling pumps dispensing:

Ultra-Low Sulfur Highway Diesel Fuel (15 ppm)
Ultra-Low Sulfur Non-Highway Diesel Fuel (15 ppm)
Low-Sulfur Non-Highway Diesel Fuel (500 ppm)
Low-Sulfur Locomotive and Marine Diesel Fuel (500 ppm)

View the EPA’s revised pump labeling requirements.

What is the Deadline For Labeling?

The proper labeling language must be displayed by October 1, 2010. However, if you turn your tanks over prior to October 1, then you can begin labeling prior to October 1.

NOTE: In the case of the ULSD Highway Diesel Fuel pump label, you can begin labeling by June 1, 2010 since this label contains changes to references to vehicle year only and not sulfur level changes.

Where Can I Purchase These New Labels?

For your convenience, OPIS has arranged for you to secure these decals for as little as $1.29 per pump decal depending on quantity ordered. The easy-to-read, black and white decals are 4”x 6” each, with letters that are 24-point bold (the minimum size that EPA requires) that will keep you in compliance and out of trouble.

To order your new decals, call 1-877-210-4287 or use this online order form.

Order your decals today! (Please allow up to 2-3 weeks delivery time).

Sincerely,

Brian Crotty

President

P.S. There is no need to wait to replace the on-road ULSD label. ExxonMobil has already replaced its on-road ULSD decals at direct-supplied stations and has informed their distributors that they will also need to replace the labels. Avoid the rush and order your ULSD on-road decals today.

This email was sent by: OPIS, 9737 Washingtonian Blvd., Suite 100, Gaithersburg, MD 20878-7364, USA. Go here to leave the Pump Decals email list or here if you want to leave all OPIS email lists. We respect your right to privacy. View our policy.